LED downlight also named LED Ceiling Light, is made of high power LED chips with standard models, like 3*1W, 5*1W, 7*1W, maximum can be 24*1W, total 24watts. Our LED downlights use SMD3014 Chip, its more bright and of higher grade and are widely used in Hotels, Exhibition Halls, and lots other indoor lighting zones.
All of our SMD3014 LED downlight are approved by CE, FCC and RoHS, and 30W with 288pcs SMD3014, 36W with 360pcs SMD3014 LED Downlight are also approved by SAA, so that make sure we can export to Europe, South America, Australia and so on.
The installation of SMD3014 LED Downlight is different and very simple too, it is a simple clip installation mode, below is a complete guide on how to install LED Downlight SMD 3014.
Our 6inch (diameter 200x H52.5mm) as a sample:
1.Please cut hole in the ceiling, the cut size should match the size of LED Downlight you are going to install;
2.Install the clips;
3.Put the longer pin inside the ceiling hole, the shorter pin at the edge ceiling hole, then push in.
More detailed information, please visit our website www.hideeled.com or contact us at email@example.com.